Shenzhen King Hardware & Building Material Co., Ltd. Company Logo Shenzhen King Hardware & Building Material Co., Ltd.
5 1

EN-1026 Scaffolding Steel Shoring Post for Building Material

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Contact us

Shenzhen King Hardware & Building Material Co., Ltd.
[China]

Address
Room 1005, 10/F, No.7 Aifu Building, Shatou Road, Shatou Community, Shajing Town, Bao?an District, S Shenzhen Guangdong
Phone
86-0755-27266644
Contact name
Canna

Quick Information

  • Brand Name: King
  • Place of Origin: China
  • Model Number : KH-SP-1600-003 Ms Canna13651497173
  • Size : 1600
  • Tel : Ms Canna13651497173

Description

Product detail:

 

1.Galvanized steel scaffolding heavy duty shoring prop for construction

 

2.Material: Q235 Carbon Steel

 

3.Tube:48mm,56mm, 60mm

 

4.Wall thickness: 1.6mm, 1.8mm, 2.0mm, 2.5mm

 

5.Finish: painted, powder painted, electro galvanized, hot dipped galvanized

 

6.scaffolding steel shoring prop

 

7.Heavy duty and light duty steel shoring prop

 

8.Bearing capacity: 10~30KN

 

9.Size: custom design or our regular sizes

 

Features:

 

1.It is up to 15 years long life time

 

2.It is durable, recyclable and safety

 

3.Reasonable stress and large bearing capacity

 

4.Improve working efficiency and save labour power

 

5.Large and saftey operating areal

 

6.Keep exactly straight

 

7.Corrosion protection alternatives

 

8.Open thread and covered thread

 

9.Adjustable telescopic, each having a series of maximum extended lengths and each having differing endplate configuration

 

Dimension:

 

Item No. Description Adjustable Length(mm) Outside Tube (mm) Inside tube (mm) Weight (kgs) Finishing
Closed Extended
KH-SP-0800-001 Spanish Props 800 1400 48×1.6×765 40×1.8×835 4.76 Painted or Galvanized
KH-SP-1600-001 Spanish Props 1600 3000 48×1.6×1600 40×1.8×1600 7.58 Painted or Galvanized
KH-SP-2000-001 Spanish Props 2000 3500 48×1.6×1716 40×1.8×2000 8.45 Painted or Galvanized
KH-SP-2200-001 Spanish Props 2200 4000 48×1.6×2000 40×1.8×2200 9.33 Painted or Galvanized
KH-SP-1600-002 Italian Props 1600 2900 56×1.6×1524 48×1.8×1600 8.81 Painted or Galvanized
KH-SP-1800-001 Italian Props 1800 3100 56×1.6×1524 48×1.8×1800 9.21 Painted or Galvanized
KH-SP-2000-002 Italian Props 2000 3600 56×1.6×1750 48×1.8×2000 10.2 Painted or Galvanized
KH-SP-2200-002 Italian Props 2200 4000 56×1.6×2024 48×1.8×2200 11.05 Painted or Galvanized
KH-SP-1400-001 German Props 1400 2700 60×2.85×1396 48×3.2×1400 14.5 Painted or Galvanized
KH-SP-1600-003 German Props 1600 2700 60×2.7×1550 48×3.2×1600 13.1 Painted or Galvanized
KH-SP-1620-001 German Props 1620 2640 60×2.0×1396 48×3.2×1610 10.5 Painted or Galvanized
KH-SP-2000-003 German Props 2000 3500 60×2.85×1900 48×3.2×2000 16.1 Painted or Galvanized
KH-SP-2200-003 Middel East Props 2200 4000 60×3.0×1900 48×3.5×2200 19.27 Painted or Galvanized
KH-SP-3000-001 Middel East Props 3000 5500 60×3.2×2680 48×3.2×2900 27.36 Painted or Galvanized

 

 

Type of shoring props:

 

Shoring entails the construction of a temporary safety structure to prop up walls in a building that has become unstable due either to foundational expansion or natural disaster. The type of shoring a contractor chooses will depend on a specific building's structural status and the circumstances surrounding the building's weakness.

 

Raking Shoring

This shoring technique deploys rakers, or scaffolding tubes, set at an incline from the ground to the top of the wall and providing support from the side along the way. The rakers originate from a sole plate embedded in the ground and continue upward to link to a wall plate screwed into the structure near its top. Rakers should be angled at 45 degrees, though an incline of up to 75 degrees is also acceptable. Rakers must be secured at intervals with braces that bolt into cleats on the wall. Experts advise against using construction wedges to connect rakers to sole plates, because wedges can fail if the building vibrates or shakes.

 

Flying Shoring

This method uses shores that don't touch the ground, but rather span in midair the widths between the walls you're propping up. The flying shoring technique focuses on a horizontal strut or shore placed between the walls, secured to wall plates and supported by a network of needles, or shorter beams, and steel construction cleats. Additional inclined struts brace into wall plates and angle upward to the horizontal shore to provide additional strength. Inclined struts gain extra support from needles at the top and straining pieces, or straining sills, at the bottom.

 

Dead Shoring

These shores provide vertical support to roofs and floors. The method is designed to arrange a system of beams and posts that can both support a building's weight and transfer the weight to a foundation on the ground. Builders install dead shores by cutting holes into walls and inserting vertical beams or girders to prop up the structure above. Dead shores, which are vertical props, are braced to a sole plate on the ground, and needles are secured horizontally to the tops of the dead shores. Builders should leave enough distance between the dead shores and the walls to allow workers to pass through the space.

 

What Shoring to Use

1.All types of shoring are suited to propping up walls that deformer or warpage and need repairs or replace.

 

2. Combinations of shoring methods also work when an adjacent structure requires demolition, or when you're cutting openings into walls.

 

3. Horizontal flying shores are ideal for support of walls in two separate buildings when a structure in between the buildings is slated for demolition. Dead shores prop up roofs and floors when the bottom segment of a wall has been removed to create an opening or to rebuild a defective load-bearing wall.

 

4. For added safety during wall-cutting, some contractors install raking shores in addition to dead shores for greater insurance against falling walls.

Scaffolding Prop 39.jpgScaffolding Prop 40.jpg

Scaffolding Prop 20.jpgScaffolding Prop 23.jpgScaffolding Prop 27.jpgScaffolding Prop 38.jpg

Scaffolding Prop 37.jpg

Scaffolding Prop 19.jpgScaffolding Prop 21.jpgScaffolding Prop 22.jpg

 

 

 

 

4.JPG


Price

  • Price Condition : FOB
  • Price : USD13 / piece
  • Delivery Port : Shenzhen

Packaging & Delivery

  • Packing :in bundles, 50sets/bundle or as per customer's req
  • Packaging Size : 4 x 56 x 48 
  • Package Weight : 12.5  Kilograms
  • Delivery Lead Time : 30 days
  • Minimum Order : 3000pcs
  • Supply Ability : 8x20'GP per week

Product Image

  • EN-1026 Scaffolding Steel Shoring Post for Building Material image

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Canna
Shenzhen King Hardware & Building Material Co., Ltd.
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Ladders & Scaffolding Parts
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.